How to Charge Earbuds Without Charging Case – Detailed Instructions

Here is a summary you need to do if you are in rush and don’t want to read all the details:

  • Use a USB-C or micro USB cable to charge earbuds directly by plugging into a power source
  • Enable battery share feature on newer smartphones that support reverse wireless charging
  • Employ Qi-compatible wireless charging pads as alternative charging sources
  • Portable wireless battery packs with built-in chargers provide charging on-the-go
  • Monitor earbud charge levels closely when charging without the case
  • Replacement charging case provides protection, storage, extra charges


Losing or damaging your earbuds’ accompanying charging case can be inconvenient when you require charging on the go. However, even without access to the proprietary charging case, there are methods to directly provide power when your wireless earbuds run low on battery. With the help of charging cables, battery sharing smartphones, wireless chargers, portable power banks and general awareness, you can keep your earbuds powered up.

Here are some more detailed instructions and various methods with associated steps:

Use Charging Cable and Power Source

The most straightforward approach is to use the charging cable that came with your wireless earbuds and plug directly into an available power source.

What You’ll Need:

  • Wireless earbuds with an exposed charging port
  • Compatible charging cable (typically USB-C or micro USB)
  • Wall charger, computer, external battery pack

Steps to Charge:

  1. Locate the small charging port on each earbud, generally located on the flat inner panel exposed when removing the eartip. This port allows direct charging access without the case.
  2. Check specifications to confirm which charging cable came with your earbuds – most often USB-C or micro USB. Then connect that cable directly into the port on each earbud.
  3. Plug the opposite end of the cable into a powered USB port. This can be on a wall charger adapter, computer, laptop, or external battery pack with sufficient power delivery output.
  4. Monitor the charge status. Most earbuds have indicator lights to signal charging is in progress. Charge until the lights show a full battery or turn off. Avoid leaving connected indefinitely once fully charged.

Take Advantage of Battery Share

batter share feature

Some newer smartphones now have a ‘battery share’ feature that enables reverse wireless charging. If both your phone and earbuds support this, you can directly charge your earbuds wirelessly from your phone’s battery reserve.

What You’ll Need:

  • Smartphone with battery share feature
  • Wireless earbuds enabled for Qi wireless charging

Steps to Charge:

  1. On your smartphone, enable the battery sharing function, which may be called ‘PowerShare’, ‘Reverse Wireless Charging’ or similar, within settings.
  2. Power on the earbuds and carefully place them face down in the center rear of the phone where its wireless charging coils are located.
  3. Keep the phone and earbuds perfectly aligned and don’t move them while charging is underway. Minimal separation between coils allows for most efficient power transfer.
  4. Periodically check both the smartphone battery level and earbud charge status. End the wireless charging session once the earbuds show a full charge, or when the phone battery gets too low.

Leverage Wireless Charging Pads

using charging pads

For supported earbuds with embedded Qi wireless charging, specialized charging pads can replenish power levels on par with the charging cases. These provide a handy backup option when your case is unavailable.

What You’ll Need:

  • Qi-compatible wireless earbuds
  • Qi-certified wireless charging pad or stand
  • Wall or car outlet for power

Steps to Charge:

  1. Ensure your earbuds have Qi compatibility by checking for the Qi logo or confirmation in technical specification listings.
  2. Place your earbuds directly on the center point of the wireless charging pad, nestling into the best-aligned position for one or both earbuds. Engaging pairing mode may help the earbuds sit tighter.
  3. Plug your charging pad or dock into a wall outlet or car 12V outlet if needed to power up the wireless transmitter coil.
  4. Monitor the earbuds intermittently to check that charging remains underway. The earbuds will get warm which is expected. Once fully charged, remove the earbuds immediately.

Invest in a Portable Wireless Battery Pack

Dedicated portable battery packs and chargers now integrate wireless charging to eliminate the cable dependency. These portable power banks contain high capacity batteries able to recharge wireless earbuds multiple times over.

What You’ll Need:

  • Qi wireless earbuds
  • Portable wireless battery pack or charger

Steps to Charge:

  1. Select an advanced power bank with integrated wireless charging base built in to enable transmitting power directly to the earbuds.
  2. Power on the battery pack and enable wireless power transfer mode if required. Green status lights typically indicate wireless charging readiness.
  3. Carefully align your wireless earbuds flat on the wireless charging section on the pack for most consistent contact.
  4. When charging pauses or the earbud status lights show fully charged battery bars, remove the earbuds immediately to avoid potential overcharging damage if left too long.

Monitor Closely and Consider Case Replacement Without the enclosing earbud case for protection, take extra precaution not to drop or expose the earbuds when charging or wearing them caseless. Check charge status very regularly to avoid overcharging direct to the earbuds – maximum 1 hour longer once showing fully charged. Investing in an off-brand replacement case tailored for your earbud model generally provides safe storage and transport, backup charging cycles and general damage protection to help offset not having the original.

Build your own wireless charger for your earbuds

making your own wireless charger

Gather Electrical Components

At its core, building a wireless charger requires two copper transmitter and receiver coils, capacitors, and circuitry for transferring energy between the coils via electromagnetic induction.

You’ll Need:

  • Copper wire for wrapping transmitter and receiver coils
  • Capacitors such as ceramic disc capacitors
  • Printed circuit board and soldering iron
  • Optional: LEDs, switches, and battery pack

Construct the Copper Coils

The most crucial components are the two copper wire coils – one connected to the power source to transmit energy, and a second fitted into your earbuds to receive the inductive energy.

To Build:

  1. Obtain sufficient gauge copper magnet wire for both coils
  2. Carefully wind the transmit coil around a circular template in overlapping loops
  3. Repeat process for the receive coil fitted to earbud dimensions
  4. Neatly trim and secure coil ends to prevent unraveling

Getting the wind spacing, loops and diameter right ensures efficient wireless power transfer later on.

Assemble the Circuit

With your custom coils ready, it’s time to wire up the electronics. Plan out the connections before soldering to avoid errors.

To Connect:

  1. Review circuit diagrams for example wiring layouts
  2. Solder capacitors, switches, LED indicators as desired onto the board
  3. Attach the power lines from the transmit coil and lead wires to the receiver coil
  4. Double check polarity and connections match circuit plan
  5. Ensure no loose strands or connections and wires are secured

Supply Power

To function, your wireless charger needs power fed into the transmit coil you built.

Powering Options:

  • Standard phone wall USB charger
  • Lithium battery integrated into charger
  • External pocket power bank with USB outlet

You want a consistent 5V DC input. Make sure your power source aligns with the rating your circuit is designed for.

House the Charger

The last step is safely housing your custom wireless charging setup inside an enclosure case.

Enclosure Ideas:

  • Altoids tins or metal boxes
  • 3D printed case matched to dimensions
  • Repurposed plastic packaging
  • Laser cut wooden chambers

Get creative with materials on hand or custom fabricate your own casing. The receive coil can be fixed in place with adhesive onto your earbuds. Ensure no exposed circuits or wires before powering up your homemade wireless earbud charger!

Customize and Experiment

Part of the fun with DIY electronics projects is customizing to your needs and experimenting with different configurations.


  • Coiling techniques for more portable chargers
  • Adding multi-color LEDs as charge indicators
  • Integrating on/off toggle switches
  • Incorporating multiple transmit coils

Harness your inner inventor to improve performance or functionality with each wireless charger revision. Let neighbors and friends in on the wireless charging magic too!

With diligent assembly of the simple components, you can craft ingenious wireless charging rigs to keep those earbuds powered up indefinitely. Your customized creation may even outperform shop-bought replacements!

How to Charge Earbuds Without Charging Case - Detailed Instructions
Article Name
How to Charge Earbuds Without Charging Case - Detailed Instructions